Anticorodal Bar
EN AW 6026
The main applications for turning, electrical applications, and the automotive industry.
An innovative alloy that meets all environmental requirements. Alloy 6026 represents a perfect compromise between the high workability of alloy 2011, and the suitability for anodic oxidation of the 6000 series alloys. Widely used for hot moulding and high-speed machining on automatic lathes.
TECHNICAL CHARACTERISTICS
- Workability: very good
- Suitability for oxidation: very good
- Hard anodisation: excellent
- Hot plastic deformability: excellent
- Weldability: excellent
AVAILABILITY
The alloy 6026 is available extruded in the physical state T6, and drawn in the physical state T3/T8. Other physical states are available upon request.
GENERAL INFORMATION
Chemical composition (% weight)
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Pb | Bi |
---|---|---|---|---|---|---|---|---|---|---|---|
0,60 | 0,20 | 0,20 | 0,600 | 0,50 | |||||||
1,40 | ≤0,70 | 0,50 | 1,00 | 1,20 | ≤0,30 | ≤0,30 | ≤0,20 | 0,050 | 1,50 |
Physical properties (state T651, indicative values)
- Specific weight: 2.7 g/dm3
- Density: 2.72 kg/dm3
- Elastic modulus: 69000 MPa
- Thermal expansion coefficient: 23.4 (x10-6/°C)
- Thermal conductivity at 20 °C: 172 (W/mk)
- Electrical resistivity at 20 °C: 0.039 (Ω mm2/m)
MECHANICAL PROPERTIES
Extruded
Status | Rm MPa | Rp 0,2 MPa | A% | HBW |
---|---|---|---|---|
T6 | 370 | 300 | 8 | 95 |
Drawn
Status | Rm MPa | Rp 0,2 MPa | A% | HBW |
---|---|---|---|---|
T6 | 370 | 300 | 8 | 95 |
T8 | 345 | 315 | 4 | 95 |
T9 | 360 | 330 | 4 | 95 |
BARATÈS. P.AVia Alberto Baratè n.5 27036 Mortara (PV) P. VAT and C.F. 00837850189 |
CONTACTSTel. 0384 92624 Fax 0384 93506 |
ER-0248/2021
CONTACT US NOW!